Theben SELEKTA 170 top2, Руководство пользователя

Страница: 8 / 118

Page | 8
Cycle A continuously repetitive sequence of channel ON and channel OFF. Start time and end
can be adjusted (hour + week day). The time period for ON (pulse duration) and
for OFF (pause duration) can also be set (hours + m seconds).
Switch
command Generic term for astro times, standard program, special programs 1-3
Astro times The switching times for sunrise and sunset, calculated according to location and time
zone.
OBELISK top2/
OBELISK top3
Memory card which can be inserted in the time switch. The program can be copied onto
the memory card and transferred from the memory card to the time switch; it is also
possible to read an additional language into the time switch from the memory card.
BLE
OBELISK top3 The BLE OBELISK top3 function is now available for new devices from the SELEKTA top3
range. Devices can be programmed, generated and set really easily via BLE (Bluetooth
Low Energy). (This function is not available for the top2 range of devices.)
Crossing Normally an OBELISK which, for example, was programmed for a SELEKTA 170 top3,
can also only be used in a SELEKTA 170 top3. The transfer, e.g. of the switching times of
a SELEKTA 170 top3 to the second channel in a SELEKTA 172 top3 (crossing) can be
performed using a diversion via the OBELISK top2 PC software. In this case, the
OBELISK top2 can be programmed accordingly, see OBELISK menu item.
Auto mode The time switch is in the standby automatic mode and performs the programmed switch
commands at the respective times.
Manual
switching
By pressing buttons ◄ and ► at the same time, manual switching can be activated in auto
mode. This is helpful if the time switch has to be switched on unexpectedly without much
warning. Manual switching represents a switching preselection, i.e. the current switching
status is overridden up to the next programmed switchover time period. By pressing both
buttons again, manual switching is released again.
Permanent
switching
By pressing buttons ◄ and ► at the same time for longer (> 3 seconds), permanent
switching can be switched on. This is helpful if the time switch has to be switched on
quickly and unexpectedly. Permanent switching overrides all stored switching times
permanently until it is released by pressing both buttons again.
In the case of a multi-channel timer, the respective buttons are
pressed for manual switching or permanent switching respectively in
the desired channel.