Theben PH-II Series, Руководство по оборудованию

Страница: 52 / 64

PH-II Simple Application Controllers Key, System Bit and Function Block Lists 9
ENG-44
9.2 System Bit Lists
There is the system bit controlled by system and the control bit to control from user program.
9.2.1 System Bit Lists
9.2.2 Control Bit Lists
*1 When both N01 and N02 are ON and hence the back light is “ON” because N02 is given
the priority.
Table 9.2: System Bit Lists
System Bit Description
M01 Always “ON”
M02 Always “OFF”
M03 Alternate - 0.5 seconds “ON”, 0.5 seconds “OFF”
M04 “ON” when Real Time Clock data error occurs
M05 “ON” when Summer time schedule is activated
M06
ON when turn Stop mode turns to Run mode in the PH-II Series. The ON signal acts
as a pulse output and then turns OFF.
M07
OFF when turn Stop mode turns to Run mode in the PH-II Series. The OFF signal acts
as a pulse output and then turns ON.
M08 Reserved
M09 Reserved
M10 “ON” when CD (DCD) signal is turned ON (receiving CD signal from modem)
M11 “ON” when it is possible to access the GSM network.
M12 “ON” when the PH-II series is accessed via GSM.
Table 9.3: Control Bits
Control Bit Description
N01
*1
ON: The back light is “OFF” in LCD.
OFF: The back light is controlled by the “Light Time” setting in Menu.
N02
*1
ON: The back light is “ON” in LCD.
OFF: The back light is controlled by the “Light Time” setting in Menu.
N03
ON: The user screen is controlled by the setting of “Display Manager” with
Pharao Software 2.0.
OFF: The user screen is controlled by user program.