Theben PH-II Series, Руководство по оборудованию

Страница: 16 / 64

PH-II Simple Application Controllers Specifications 2
ENG-8
2.2 Input Specification
*1 Current leakage from the sensors connected to the inputs might provide enough current
to turn the controller On. Do not use two wire sensors
0
*1 EI1 and EI2 in PH-II 4EDA can be used as High Speed Counters.
When using the High Speed Counter function, the input response time is 0.5ms or less.
Table 2.2: AC Input Specifications
Description
AC Input Specification
main unit PH-II 4ED
I01 - I08 I09 - I15 EI1 - EI4
Input Voltage 100 - 240V AC~, +10% -15%, 50/60 Hz
220 - 240V AC~, +10% -15%,
50/60 Hz
Input Current
0.13mA / 120V AC~
*1
0.25mA / 240V AC~
*1
0.15mA / 120V AC~
*1
0.29mA / 240V AC~
*1
7.5mA / 240V AC~ 50Hz
9.0mA / 240V AC~ 60Hz
Input Impedance ³ 800 k W
32k W (50Hz)
27k W (60Hz)
OFF ® ON/ ON ® OFF ³ 80V / £ 40V ³ 160V / £ 40V
Response
Time
OFF ® ON
35-85ms, 120V AC~
25-55ms, 240V AC~
15 - 40ms / 240V AC~
ON ® OFF
35-85ms, 120V AC~
50-130ms, 240V AC~
Isolation Circuit None Photocoupler
Operation Indication Liquid Crystal Display
Table 2.3: DC Input Specifications
Description Sink (“-” Common) Source (“+” Common)
Input Voltage 24V DC +20% -15% 24V DC +20% -15%
Input
Current
main unit
I01 - I08
5.5mA, 24V DC
6.0mA, 24V DC
I09 - I15 5.5mA, 24V DC
PH-II 4EDA EI1 - EI4 5.4mA, 24V DC 5.4mA, 24V DC
OFF ® ON/
ON ® OFF
main unit I01 - I15
Current: ³ 4.7mA / £ 1.1 mA
Voltage: £ 4V / ³ 18V
Voltage: ³ 18V / £ 4V
PH-II 4EDA EI1 - EI4 Voltage: ³ 18V / £ 4V Voltage: ³ 18V / £ 4V
Response
Time
main unit 10 - 20ms
PH-II 4EDA
*1
10 - 20ms
Isolation
Circuit
main unit None
PH-II 4EDA Photocoupler
Operation Indication Liquid Crystal Display