29
TROUBLE SHOOTING
Problem
1. Incorrect wiring or no
power inputs.
2. Improper settings of
LUX and METER.
3. Beyond the detection
zone.
4. Halogen light is bad.
1. Nuisance triggering.
2. Time set does not
reach.
Possible Faulty Reason
Suggested Solution
1. Make sure wirings are
correct and has power
input.
2. Adjust LUX to “ ”
and METER to “+”.
Restore power and
check if indicator (LED)
turns on.
3. Make sure Transmitter
LU101-180HF is moun-
ted within the detection
range.
4. Make sure the halogen
light functions normally.
1. Check if the ambient
light reflects to the
motion detector causing
nuisance triggering. If so,
adjust the direction of
the Motion Sensor.
2. Make sure time set rea-
ches.
When Transmitter LU 102/180 HF fails to work normally, check
assumptive problems and suggested solutions in following table that will
be hopeful to solve your problem.
SHIELDING LABEL
This label provides to cover the lens
that would reduce detection coverage.
Light does not
turn on.
LED does not
turn off.
Remarks:
1. Theben HF products are allowed to sell to all EU and EFTA countries.
2. The receiver complies with essential safety and radio frequency with CE
(LVD & EMC) and R & TTE directives.
0122
N
DK
SF
IS
S
E
D
F
P
I
B
NL
L
GR
GB
IRL
CH
A
APPROVAL
Manuale_LU102_180HF 2004.3.30 12:39 AM Page 29
