17
SET-UP CHANNEL
Transmitter and Receiver communicate each other by having same
channel. Transmitter LU 102/180 HF has been preset its system channel
at “I” and unit channel at “9” before it is ex-factory.
Please check the channel setting on receiver to be used with Transmitter
LU 102/180 HF.
The user has to adjust the receiver to have same settings with LU
102/180 HF’s System Channel at “I” and Unit Channel at “9”. Or, change
them respectively to user’s desired channels. However, if Transmitter LU
102/180 HF and the combining receiver have same channel setting with
other wirefree device around them, it DEFINITELY needs to change
them to the new channels.
Do not adjust System Channel to “A” position and Unit Channel to
“1” position on all HF Theben series. Though HF Theben series
provide 256 combinations for channel settings, the best for the user is
to use 255 combinations and exclude one combination A1 from your
channel setting because A1 is very easy to get interference from other
similar product in the market that eventually makes wirefree device
abnormally working.
Item
Quantity
Note
Motion sensor/
1
Halogen Light
Manual
1
U-bracket
1
500W Halogen Bulb
1
(J Type)
Screw
2
ø 3x8mm
(For Cable Clamp)
Cable clamp
1
Rubber Grommet
2
Lens Shielding Label
1
65x11mm
PACKAGE CONTENT
Manuale_LU102_180HF 2004.3.30 12:39 AM Page 17