THE WORLD MODELS SPITFIRE 40 Скачать руководство пользователя страница 3

P.2

10. THROTTLE PUSHWIRE Ø1.2x350mm -- 1 pc.
      PLASTIC TUBE d2xD3x150mm -- 1 pc.

      SOCKET HEAD SCREW M3x25mm -- 4 pcs
      WASHER d3xD7mm -- 8 pcs

      M3 NUT -- 8 pcs

11. SILICON GROMMETS PL1265035 -- 4 pcs
      SPINNER Ø82mm PL2111082 -- 1 set
      SCREW PWA2.6x12mm -- 4 pcs
      COWLING --1 pc.

      TRANSPARENT 3D TEMPLATE -- 1 pc.

12. 

LINKAGE CONNECTOR Ø2.1mm w/ set screw -- 1 set

13. STRAPER PL4112102 -- 2 pcs
      FUEL TUBE D6x5mm -- 2 pcs
      PUSHROD CONNECTOR PL4410010 -- 1 set    
      PUSHROD Ø1.8x85mm (For Elevator) -- 1 pc. 
      SPONGE 10x80x200mm -- 2 pcs
      PLYWOOD 6x42x87.5mm -- 1 pc.
      BALSA 6x6x42mm -- 2 pcs

14. BUTTON HEAD SCREW HM4x35mm -- 2 pcs
      BUTTON HEAD SCREW HM4x60mm -- 2 pcs
      WASHER d4.2xD14.5mm -- 4 pcs

15. CANOPY -- 1 pc.
      SCREW PWA2.3x8mm -- 4 pcs  
      SILICON GROMMETS PL1265035 d1.5xD6.5mm -- 4 pcs
      PILOT PC001063A -- 1 pc.
      DOUBLE - SIDE TAPE 8x800mm -- 1 pc.

16. DECALS: A339 DEC -- 1 set

Parts List

COVERING:--

TOUGHLON STL 340 OLIVE DRAB

TOUGHLON STL 203 LIGHT GRAY

TOUGHLON STL 311 FERRARI RED

TOUGHLON STL 331 CUB YELLOW

TOUGHLON STL 100 WHITE

LIGHTEX SGX 351 DARK BLUE

 1. MAIN WING -- 1 pair

 2. PUSHROD Ø1.8x100mm w/ Threads (For Aileron) -- 2 pcs
     TRI-HORN PL4111221 -- 2 sets
     SCREW PB2x25mm -- 4 pcs
     SCREW PB2x22mm -- 2 pcs
     SCREW PWA2x8mm -- 16 pcs
     CLEVIS PL4112103 -- 2 pcs 
     FUEL TUBE D6x5mm -- 4 pcs
     STRAPER PL4112102 -- 2 pcs
     SERVO MOUNTING PANEL PL5310000 -- 1 pair
     MAIN LANDING GEAR COVERS -- 1 pair
     RETRACTABLE  LANDING GEAR COVERS -- 1 set
     WING JOINER 8x24x149mm -- 1 pc.
     180mm Y-CORD KW0021800 -- 1 pc.
 
 3. STABILIZER & ELEVATOR -- 1 set
     FUSELAGE -- 1 pc.

 4. VERTICAL FIN & RUDDER -- 1 set

 5. PUSHROD Ø1.8x570mm w/ Threads (For Elevator) -- 2 pcs
     SCREW PB2x12mm -- 6 pcs
     CLEVIS PL4112103 -- 2 pcs
     TRI-HORN PL4111221 -- 2 sets
     FUEL TUBE D6x5mm -- 2 pcs

 6. PUSHROD Ø1.8x640mm w/ Threads (For Rudder) -- 1 pc.
     CLEVIS PL4112103 -- 1 pc.
     SCREW PB2x12mm -- 3 pcs
     TRI-HORN PL4111221 -- 1 set
     FUEL TUBE D6x5mm -- 1 pc.

 7. TAIL LANDING GEAR -- 1 set
     TAIL WHEEL Ø26mm -- 1 pc.
     COLLAR Ø2.1mm w/ Set Screw -- 1 set
     SCREW PA3x12mm -- 2 pcs
     SCREW PM2x10mm -- 1 pc.
      ALUMINIUM PLATE 0.3mm -- 1 pc.
      M2 NUT -- 1 pc.

 8. FUEL TANK 450cc -- 1 set
     CABLE TIE 1.5x5x400mm -- 1 pc.
     DOUBLE-SIDE TAPE 40x120mm -- 1 pc.

 9. 

ENGINE MOUNT PL5111050 -- 1 set 

     SOCKET HEAD SCREW M4x30mm -- 4 pcs
     WASHER d4xD9mm -- 4 pcs

A339PO30731501

Содержание SPITFIRE 40

















Отзывы: