6.Store Name:
5.Date of Purchase:
Wing QC# Fuselage QC#
(QC numbers are stamped on wing and fuselage)
4.Model:
3.Phone #: e-mail:
2.Address:
1.Name:
The ideal C.G. position is 53mm (2.1 in.) ehind the leading edge
measured at where the wing meets the fuselage. In order to obtain
the C.G. specified, add weight to the fuselage or move the battery
position. Check the C.G. Before flying.
b
53mm
C.G.
2.1 in.
Important Safety Precautions
Warning!
P.9
C.G
.
12
#First time flyer should never fly by himself/herself. Assistance from experienced flyer is
absolutely necessary.
#Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly
pre-adjusted aircraft.
# is specially designed to be powered by
KM0283010 Outrunner Motor
.
to higher speed which will damage the wing structure and airframe, and will not be covered
by manufacturer ’s warranty.
#Make sure the air field is spacious, never fly the plane too close to people and never get
too close to a running propeller.
#If you find wrinkles on the covering as a result of weather changes, you can use hot iron
to remove the wrinkles. Please begin with lower temperature setting and gradually raise
the temperature until the wrinkles are gone. Too hot an iron may damage the covering.
#Check and re-tighten up all factory assembled screws, use thread locker if applicable.
with 2-cell 7.4V Li-Po battery operation. Using more powerful system will push the model
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model, including
product news and free upgrade parts when applicable. Please fill in the following and send to
Please call AirBorne Models at 925 371 0922 for any assistance in filling this form.
Thank you very much for purchasing our product.
Air orne Models,
4749-K, Bennett Drive, Livermore, CA 94551 USA
B
.
http://www.theworldmodels.com/para/instruction/instructionManuals.php
E182NXMPO25961107
