The Telios Alliance Z/IPStream R/1, Быстрая настройка

Страница: 3 / 16

|
1
Streaming with Z/IPStream R/1 involves the following primary tasks:
1. select the audio input,
2.
configure the network settings,
3. select an audio processing preset,
4.
select the codec used to encode the stream, and
5. select a destination server to distribute the stream to the end-listeners.
This section walks you through a simple setup where the Z/IPStream R/1 is fed analog audio, the
network settings are configured via DHCP, and the stream is sent to a ShoutCAST v2 server. If your setup
is different, you may safely skip this section. If this is the first time you have used a Z/IPStream R/1, you
may to have a look at the [Front Panel] and [Entering Text] sections in the back before you proceed.
Settings
From the front panel of the Z/IPStream R/1, set the following menu options.
Audio
n Connect an audio source to the XLR inputs and select Audio Input: XLR.
n Verify Input Gain Setting is
0.0 db
.
1
Quick Start Setup Guide