The dryer only blows cold air during a full cycle:
+
Disconnect the power. Remove the dryer cove and check/ ensure heater switch
is ON. Disassemble the blower- motor/ fan housing. Test the thermostat for open
circuit. Check the heater element for signs of burning or breakage. Damaged
element must be replaced.
The air stream is low pressure and velocity:
+
Check the output nozzle for obstructions, If none are present, disconnect the
power. Remove the dryer cover. Remove any dust/lint buildup from intake vent
slots. Check VR for speed setting. Disassemble the blower / motor / fan housing.
Check motor brushes for wear; if less than 1 1/4
"
is remaining. Replace brushes.
We are always looking to improve. If these steps
did not solve your problem please contact us
and we will endeavor to help.
Tel: 310 410 5008
Email: [email protected]
20 + TSL.R.030 RIBBON HAND DRYER MANUAL
