The Splash Lab TSL.R.010 Series, Установка и обслуживание

Страница: 15 / 20

If the dispenser will not run
+ Ensure there is power to the dispenser and the wire from the AC adaptor is
connected correctly to the pump motor.
+ Check that the sensor cables are fully connected to the corresponding cables
from the foam pump unit.
If the dispenser can be heard to operate, but soap is not dispensed
+ Check that the soap pick-up pipe is fully immersed in the soap in the reservoir. If
necessary, replenish the soap in the reservoir.
+ Check that there are no leaks in the pipework, and that all connections are fully
pushed home.
If the dispenser runs all the time
+ It is likely that the sensor is detecting either an object, or refection causing it to
operate constantly.
+ Remove the obstruction or cause of reflection.
We are always looking to improve. If these steps
did not solve your problem please contact us
and we will endeavor to help.
Tel: 310 410 5008
Email: info@thesplashlabusa.com
troubleshooting
TSL.R.010 RIBBON SOAP DISPENSER 15