The Splash Lab TSL.R.010 Series, Установка и обслуживание

Страница: 12 / 20

7
~~
A
B
DC
AC
plate
pushing shaft
9
Connect the wire of the soap dispenser
to the wire of the control box assembly.
Connect the tube of the soap dispenser
to the connector on the soap pump.
10
Push the soap tank to the track. Make sure
the soap pump plate is under the pushing
shaft before you put back the soap tank,
so the soap dispenser can work properly.
Plug-in an AC adapter or battery box to
supply power. Installation finished.
*To use power mains as the power source,
do not place batteries in the battery
compartment.
how to install
12 + TSL.R.010 RIBBON SOAP DISPENSER MANUAL