E - 6
OPERATION (continued)
1
A
KARAOKE FUNCTIONS
Sing along with the music by plugging the provided microphone into either one of the microphone jacks on the
unit.
WARNING
: Tapping or dropping the microphone can permanently damage your microphone. Do not swing the
microphone around by the cord as this will damage the microphone.
REPEAT
To repeat the track currently playing, press the REPEAT button
once. The REPEAT ONE ( ) indicator will light up.
To repeat all tracks, press the REPEAT button twice. The REPEAT
ALL ( ) indicator will light up.
To clear the REPEAT function, press the REPEAT button again. The
NO REPEAT ( ) indicator will turn on.
PROGRAM
Use the PROGRAM button to program and play songs in a pre-
selected order.
1. Programming can be done in the Stop mode only. Press the
PROGRAM button, the “PROG SET 01:--” (-- is total number
of tracks) will show on the monitor. Press the SKIP buttons to
select a desired track.
2. Press the PROGRAM button to confirm the entry. You can
repeat the same steps for a maximum of 20 tracks.
NOTE
: “PROG FULL” will be shown on the monitor if you attempt
to program more than 20 tracks.
3. Press the PLAY button after you have completed the programming process and you are ready to listen to your
selected tracks. Press the STOP button to clear all the programmed entries.
MIC VOLUME
Adjust the MIC VOLUME control to a desired level to
obtain the best performance.
WARNING
: To avoid microphone feedback, do not
hold the microphone too close to the speakers.
ECHO
Adjust the ECHO control to enhance the singers’
voice for a concert hall effect.
BALANCE
Allows you to eliminate the lead singers’ voice by
rotating the knob to the left when playing a multiplex
recording or eliminate the music when rotating the knob
to the right.
NOTE
: When playing an audio CD or CDR/RW with
downloaded music, the balance knob will shift the
recording to the right or left speaker.
AUTO VOICE CONTROL (MULTIPLEX DISCS
ONLY)
Allows you to replace the lead singer’s voice with
your own when playing a multiplex recording. The
vocals on the multiplex recording will be muted when
using the microphone. When the microphone is not
in use, the pre-recorded vocals will resume on a
multiplex disc. The Auto Voice Control can be
activated by pressing the A.V.C. ON/OFF button.
STVG529-ENG(US).qxp_Layout 1 27/6/14 10:32 Page 6
