E - 9
TROUBLESHOOTING GUIDE (continued)
PROBLEM
SOLUTION
POSSIBLE CAUSE
Play track that includes music and vocal
or set the balance knob to the mid
point.
You are playing a music only track
and the balance is not set
properly.
Adjust balance to middle.
Balance is set either to the left or
right.
Switch AVC feature off.
AVC is activated.
While playing a CDG and
singing with the microphone,
the music or vocals cut out
Increase the echo level as needed.
Echo is set to minimum.
No sound or low volume
from the microphone
While playing a CDG track
with music and vocals, only
music or vocals play
Connect from AV OUT of Singing
Machine to the VIDEO IN on your TV.
Confirm you are playing a CDG.
Use your TV Remote to select the
corresponding VIDEO input.
Lyrics do not appear on
the TV screen
TV does not have video line input.
Source has not been selected on
your TV.
Check the disc to be sure it is clean.
A CDG is loaded but the CDG
indicator on the monitor is off.
Follow direction in the “
CONNECTIONS” section.
Switch Mic to the ON position.
Securely connect the MIC to the MIC
jack.
MIC is OFF.
Adjust mic volume to max, and then
re-adjust to a comfortable level.
Mic volume control.
The MIC is not connected to the
MIC jack securely.
Adjust the Master Volume knob to
a comfortable level.
Master Volume is set to
Minimum.
Speak or sing into the top of the
microphone; no more than 1” away
from your mouth.
Microphone is not positioned
correctly.
No sound from mic
Video cable is not connected
properly to the TV.
STVG529-ENG(US).qxp_Layout 1 27/6/14 10:32 Page 9
