05/2021 V 1.0
VIEW 23
14/17
Measure the width of the Door (glass
width). Cut the Bottom Door Seal
accordingly.
Trim the outside edges on both ends to
allow the two Vertical Seals to touch
the Glass.
Attach the Seal ensuring the Seal is
correctly oriented.
Push both Vertical Seals down as far as
they can go.
With a straight edge, mark where the
Seals will be trimmed. Remove the
Seals and trim with a fine toothed
junior hacksaw so they are flush with
the tops of the Glass Panels.
Replace the seals.
Attach the Handle if included. Secure in
place with the grub screws provided.
The Handle should be oriented so that
the grub screws are not visible when
looking down on the handle.
Outside of
enclosure
41
42
43
44
