Instructions for installation and use
1. Remove all parts from the packaging and
check the ramps are free from damage.
2. Press the button and pull out the telescopic
part until clicks into place, to extend the
ramp, hold it horizontally or lay it on the
floor. Note: If the latch is released (or is not
engaged) when the ramp is not horizontal,
the inner section may slide out under its
own weight. At full extension, the latch will
engage to prevent the inner ramp sliding
out totally
4. Position the ramps at the required distance
apart. The front and rear wheels of the
vehicle should be able to run up the ramp
freely.
3. Place the ramp on the landing surface
ensuring that the top lip is resting securely
on the landing surface.
5. Ensure the top lip is secure before using the
Telescopic Channel Ramps
6. After use, press the button and slide the
sections back together until the latch
engages. When locked, the ramps can
be carried safely.
7. Do not exceed the maximum load.
Important Note:
To prevent the ramp from becoming dislodged
during use, ensure the top lip overlaps the landing
surface as far as possible.
The surface holding the top lip needs to be
substantial; make sure that the surface and
supporting structure is of sound construction.
