(11)
Attach bottom cap to fan body by aligning slots on
cap with fittings inside fan body, and rotating clockwise, or
proceed to step
(12)
if you are using the optional light kit.
(12)
To install optional light kit, begin by identifying all parts,
then follow steps
(a)
through
(f)
below:
(a)
Remove inner cup
from fan body.
(b)
Attach socket to
inner cup and run wire
leads through center
hole.
globe
socket screws
socket
(13)
Install optional wall control as described in the control installation instructions
(unless you are using a handheld remote control only).
(15)
The rotor and motor of your fan have been dynamically balanced at the factory.
In addition, the blades have been matched to the nearest gram to ensure a well
balanced ceiling fan. Furthermore, a blade balancing kit has been included with your
fan. Please refer to the instructions packaged with the balancing kit should your fan
require additional balancing.
(14)
Your fan is reversible for summer and winter operation.
The reverse switch is located on top of the fan body. The
LEFT position is for summer and the RIGHT position is for
winter.
reverse switch
(c)
Snap together wire
leads from fan body to
wires from socket.
Reinstall inner cup.
(d)
Install LED
lamp/bulb (included
with light kit).
(e)
Identify three
channels in glass
globe to align with
fittings on inner cup.
(f)
Aligning channels
and fittings, rotate
glass globe in the
clockwise direction until
securely in place.
channel
LED lamp/bulb
*
not picuted
709 Washington Street
Ashland, OR 97520
(tel) 888.588.3267
(e) [email protected]
w w w . m o d e r n f a n . c o m
