11
12
The rotor and motor of your fan have been dynamically tested and balanced
during manufacturing and production. In addition, the blades have been
matched to the nearest gram to ensure well balanced operation. Furthermore,
a blade balancing kit has been included with your fan. Please refer to the
instructions packaged with the balancing kit should your fan require
additional balancing.
Fan Balancing
The REV button can be used to change the direction of the fan for summer or
winter operation. Allow adequate time for the fan to come to a complete stop
and then restart in the opposite direction. The fan will return to the same speed
at which it was operating prior to the REV button being used. Alternatively, you
can leave your fan in the summer (downward) airflow setting and simply set it to
a low speed for winter use. This method will also achieve effective destratification
(recirculation) of warmer air trapped at the ceiling level.
The LIGHT button turns the light on and off with each contact. If dimming is
enabled, pressing and holding the light button will achieve continuous dimming
(cycling all the way down then all the way back up) until you release the LIGHT
button. The top and bottom of the dimming range are indicated by an audible
“chirp” from the receiving unit.
If you slide the ON/OFF switch to “OFF”, the fan will return to the same speed
and directional setting (and light setting if an optional light is installed) when you
slide the switch back to the “ON” position. The same memory function will exhibit
if you are using an ON/OFF toggle switch in combination with a handheld remote
control (transmitter).
It is recommended that when the fan is not in use for an extended duration, the
ON/OFF switch on the wall control (transmitter) should be moved to the “OFF”
position. Similarly, if you are using an ON/OFF toggle switch in combination with
a handheld remote control (transmitter), it is recommended that the switch be
turned “OFF” when the fan is not in use for a continuous duration.
