D I S M A N T L I N G
1.
Glass wings are fixed using glass adapters into the pod closest to panel. To undo the
adapters, carefully peel back the acoustic foam from backing. Find the locating holes and
place your hand into it to undo the wingnuts.
2.
Undo five in total and then release the back panel wings by pulling away from pod.
3.
Repeat process on opposite wing.
Approximate weight is 35kg’s and we advise that two members of staff operate wearing correct
safety equipment, gloves, and safety glasses.
Although glass is tempered with polished edges, please do not lean glass against anything sharp.
Before moving, make sure you have a soft matt to place glass on. Please note, glass does not like
to be stored on its edges. When storing glass, be sure to lean on a flat surface with enough lean to
stop glass toppling and maintain
consistent contact throughout.
PODS
We advise two people carry the meeting
pods. Always be aware as natural weight of
the pod is unsecure standing alone. Be
sure to hold your pod when upright. Falling
may cause a fatal injury. Place pods on a
clean dry, soft matt for protection.
PLEASE NOTE
The Meeting Pod Company is not responsible for the private dismantling of meeting pods. If you
would like us to dismantle your pods for you please contact us directly for a quotation. We also
offer a moving service, please call for more information. Please wear suitable safety equipment
when dismantling the pods.
GLASS WINGS
26kg
