L I G H T I N G
Meeting Pods with Back Panels
If your meeting pod includes a back panel with a connected
table, your sensor will be located in black at the front of the
table.
Wave your hand within 40mm of the sensor to power the
pod on and to turn pod off during times not used. With low
voltage LED bulbs and options to switch off we like to make
the pod as efficient as possible.
Meeting Pods without Back Panels
If your meeting pod does not have a back panel, your
greeting sensor will be silver and located on the right-hand
side, two thirds of the way up the pod.
Wave your hand within 40mm of the sensor to power the
pod on and to turn pod off during times not used.
Changing your Bulbs
Within this pack you will find a complimentary set of MR 16 bulbs. When required, follow these
instructions to change the bulbs:
1.
Turn off at mains switch then remove pod plug from a socket located in your building.
2.
Wait 15 minutes incase bulbs are still hot to touch.
3.
Then using the Alan key supplied in the pack to undo the grub screws anticlockwise from
both sides of the lighting shell.
4.
With spare hand catch bulb and re fit with new bulb, making sure bulb pins are located
correctly into slots.
5.
Tighten up grub screws both sides in a clockwise direction.
6.
Great, now plug into socket, flick the switch on to check your bulb, remembering to wave
hand in front of greeting sensor.
TURN THE LIGHTS ON…
