3
4
Insert 1
toddler rail pin
into
left end panel
as shown, using a screwdriver. Secure, but do not over tighten, the
toddler
rail pin
.
At this point, carefully release the
side panel
. Remove 2
barrel cams
from
side panel
. Remove 1
cam screw
from each
end panel
. Set hardware and component aside until further instructions.
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Jenny Lind Toddler Rail
Assembly Instructions
Page 3 of 6
Made in Vietnam - r07