The Handy THTLS42, Инструкция по эксплуатации

Страница: 19 / 28

BRUSH REPLACEMENT
•
Remove the hopper bag from lawn sweeper.
•
Only replace one brush at a time.
•
Tip the sweeper forward on housing. Do not remove the hex bolts from double brush retainers.
•
Loosen hex bolts and hex lock nuts from single brush retainers. Slide brush out of retainers, making note
of over-lap bristles position.
•
Install new brush, make sure the over-lap bristles are in the same position as before replacement.
STORAGE
•
Be sure to completely empty, clean and dry the sweeper hopper bag before storage.
•
Failure to properly clean the sweeper and hopper may cause deterioration such as rust or mold.
•
Lightly lubricate all sweeper surfaces and moving parts to protect components and prevent rust.
•
Store indoors or in a protected area during severe weather and winter months.
•
Sweeper can be stored compactly:
o
Pull the two bag arm tubes (#9) out of hitch tubes (#1 & #2).
o
Remove the two hopper support rods (#11).
o
Don’t allow the brushes to contact the ground during storage to prevent damage.