STEP 3 -
SECURE HITCH TUBES TOGETHER
Once the Hitch tubes are attached, pass two Hex Bolts M8x75 (
A
) through the hitch-end (away from the
sweeper body) of the tubes to connect them together using two Nylon Lock Nuts M8 (
G
).
Tighten loosely.
STEP 4 - MOUNT HITCH ASSEMBLY TO HITCH TUBES
NOTE: If your vehicle’s tow hitch is between 8” and 10”, mount the angled hitch bracket on the bottom of the
hitch tubes for best performance (See Figure B). For vehicles 11” and higher, see Figure A.
Attach the Hitch assembly in the following order: (
see
figure A
)
•
Mount the angled hitch bracket on top of the hitch tubes, with the straight hitch bracket on the bottom.
•
Pass two hex bolts M8x50 (
B
) through the angled hitch bracket, premade notches in the hitch tubes,
straight hitch bracket, and tighten loosely with two nuts M8 (
G
).
•
Finally, pass the Hitch Pin (
Y
) through angled hitch bracket, Hitch Spacer (
M
), and straight hitch bracket,
and fasten with R Pin Ø3 (
N
)
.
Содержание THTLS42
Страница 26: ...NOTES ...
Страница 27: ......
