STEP 5
•
Slide the Inner Axle Bushing
(37)
onto the right side of the axle, pushing the Inner Axle Bushing into the
Outer Axle Bushing until tight.
•
Starting with the right side, slide a Nylon Washer
(52)
onto the axle, attach the Wheel
(36)
to the axle and
fix with a M5x45 Hex Bolt
(47)
& M5 Lock Nut
(55).
Slide a second Nylon Washer
(52)
onto the axle.
•
Place Flat Washer Ø16
(34)
onto the axle as shown and then fix the end cap, using a rubber mallet.
•
Now repeat the above steps on the left side, however you will not secure the wheel with a M5x45 hex
bolt.
NOTE: To assist with turning, only one wheel is affixed to the axle shaft.
Ensure the outer & inner
bushes are located correctly.
