The Handy THLC29140, Инструкция по эксплуатации

Страница: 12 / 28

OIL DRAIN HOSE
Running the engine with dirty oil can cause premature engine wear and failure. Changing oil regularly is
extremely important. The flexible oil drain hose is equipped to drain oil into the appropriate receptacle.
EXCITER
An eccentric weight mounted on the exciter shaft contained within the exciter housing is driven at high speed
by a clutch and belt drive system. This high-speed shaft revolution causes the rapid lifting and downward
ramming motion of the machine as well as imparting a forward motion.
FUEL SAFETY
•
Fuel is highly flammable, and its vapours can explode if ignited. Take precautions when using to reduce
the chance of serious personal injury.
•
Only refill or drain the fuel tank in a clean well-ventilated outdoor area. Use an approved fuel storage
container. Do not smoke, or allow sparks, open flames or other sources of ignition near the area while
adding fuel or operating the unit. Never fill the fuel tank indoors.
•
Keep grounded conductive objects, such as tools, away from exposed, live electrical parts and connections
to avoid sparking or arcing. These events could ignite fumes or vapours.
•
Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel
tank or add fuel while the engine is running or when the engine is hot. Do not operate the machine with
known leaks in the fuel system.
•
Loosen the fuel tank cap slowly to relieve any pressure in the tank.
•
Replace all fuel tank and container caps securely and wipe up spilled fuel. Never operate the unit without
the fuel cap securely in place.
•
Avoid creating a source of ignition for spilled fuel. If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and avoid creating any source of ignition until fuel
vapours have dissipated.
•
Store fuel in containers specifically designed and approved for this purpose, safely away from sparks, open
flames or other ignition sources.
•
Never store a machine with fuel in the tank, inside a building where fumes may reach a spark, open flame,
or other ignition source. Store fuel in a cool, well-ventilated area.
•
Allow the engine to cool before storing in any enclosure.
ADDING FUEL
Fill the fuel tank as instructed in the separate Engine Manual packed with the machine.
Fill the tank to no more than 12.5mm (1/2”) below the bottom of the filler neck to allow space for
expansion.
1
2