The Handy THLC09715 Скачать руководство пользователя страница 10

Страница: 10 / 28

ASSEMBLY

Follow the below assembly instructions carefully, you should be able to assemble the machine in a short
period.

WARNING

If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed

this warning could result in serious personal injury.

Do not attempt to modify this product or create accessories not recommended for use with this product. Any

such alteration or modification is misuse and could result in a hazardous condition leading to possible

serious personal injury.

Do not connect to power supply until assembly is complete. Failure to comply could result in accidental

starting and possible serious personal injury.

STEP A

Mount the tipping handle on the right side of the box. Align the holes and fasten with two M8x35 hex bolts,
four washers and two nuts.

STEP B

Align the holes of the handlebar with the mount bracket and secure each with a spring washer, flat washer and
a M10x20 bolt. Fasten each handlebar support onto the engine deck with a spring washer, flat washer and a
M8x25 hex bolt.

Содержание THLC09715





























Результаты поиска

Содержание THLC09715

Отзывы:

Бренды по названию

Популярные бренды

The Handy THLC09715, Инструкция по эксплуатации

Результаты поиска

Содержание THLC09715

Отзывы:

Бренды по названию

Популярные бренды