background image

 
 

 

 
 

 
 

 
 

 
 

 
 

 
 

 
 

STAY ALERT  

  

Do not operate the machine while under the influence of drugs, alcohol, or any medication that 
could affect your ability to use it properly. Do not use this machine when you are tired or distracted 
from the job at hand. Be aware of what you are doing at all times. Use common sense. 

AVOID DANGEROUS CONDITIONS  

 

Make sure there is adequate surrounding workspace. Cluttered areas invite injuries. 
Keep your work area clean with sufficient light. Keep the area around the machine clear of 
obstructions, grease, oil, rubbish and other debris which could cause persons to fall onto moving 
parts. 

INSPECT YOUR MACHINE  

  

Check all bolts, nuts, and screws for tightness before each use, especially those securing guards and 
drive mechanisms. Vibration during use, may cause these to loosen. 
Form a habit of checking to see that all other tools/equipment are removed from the working area 
before turning it on. 
Replace damaged, missing or failed parts before using it. Warning labels carry important 
information. Replace any missing or damaged warning labels. 

DRESS PROPERLY

 

Do not wear loose clothing, gloves, scarfs, neckties or jewellery (rings, wrist watches), which can be 
caught in moving parts. Protective electrically non-conductive gloves and non-skid heavy duty 
footwear are highly recommended when working. Wear a face or dust mask if the operation is dusty. 
Always wear safety glasses/goggles and/or face shields. Everyday eyeglasses have only impact 
resistant lenses; they are not safety glasses/goggles. Wear protective hair covering to contain long 
hair, preventing it from getting caught in machinery.  

AVOID ELECTRICAL SHOCK  

 

 

Check that the electric circuit is adequately protected and that it corresponds with the power, 
voltage and frequency of the motor. Check that there is a ground connection, and a regulation 
differential switch further up the circuit. Ground the log splitter. Prevent body contact with 
grounded surfaces: pipes, radiators, ranges, and refrigerator enclosures. Never open the pushbutton 
box on the motor. Should this be necessary, contact a qualified electrician. Make sure your fingers 

do not touch the plug’s metal prongs when plugging or unplugging the log splitter.

 

KEEP BYSTANDERS AND CHILDREN AWAY  

 

Keep unauthorised persons a minimum distance of 10 metres away from the machine.

 

If 

approached, stop the machine immediately.

 

Do not allow children to handle or climb on the 

machine. 

DO NOT OVERREACH 

Keep proper footing and balance at all times when using the machine. Never stand on the 
machine. Serious injury could occur if the machine is tipped or if the moving parts are 
unintentionally contacted. Do not store anything above or near the machine, where anyone might 
stand on the machine to reach them. 

AVOID INJURY FROM UNEXPECTED ACCIDENT    

Keep hands & feet out of the way of all moving parts. Do not place any part of your body or any 
tool e.g. in the machine during operation.  

DO NOT FORCE TOOL    

Always work within the rated capacity. Do not use the machine for a purpose for which it was not 
intended.  

NEVER LEAVE MACHINE RUNNING UNATTENDED  

 

Do not leave the machine unattended until it has come to a complete stop. 

MAINTAIN YOUR MACHINE WITH CARE  

 

Clean the machine immediately after use. Keep the machine clean to ensure it operates to its full & 
safest performance. When maintaining this machine, only the 

manufacturer’

s original replacement 

parts should be used. The use of non-original manufacturer parts may invalidate your warranty. 

Содержание 193855002





















Отзывы: