When the appliance is in standby mode, the remote control will show the current time,
battery level and operating mode at the top of the screen.
Timer Mode
In timer mode the appliance can be set to operate and turn off at a set of pre-
programmed times.
Timer Mode - Setting the Day/Time
Press MODE to choose
. ‘MON’ will blink on the screen.
Press +/- buttons to select a date from ‘MON’ to ‘SUN’.
When correct day is blinking press </> buttons to select the hour setting. The hour
setting will now blink – press the +/- buttons to select the correct hour.
When the correct hour is blinking press </> buttons to select the minute setting. The
minute setting will now blink – press the +/- buttons to select the correct minute.
Timer Mode - Setting the Programme
Press MODE to choose
. ‘OFF’ will blink under the
icon.
Press +/- buttons to highlight ‘ON ASC’ above the
icon. This switches to smart
mode. Press > button to move to the next step.
Press MODE button to highlight the day to set a programmed start/end time to
operate the heater. Press +/- to cycle between ‘MON’ and ‘SUN’. When the correct
day is blinking press </> to adjust the start time setting.
The word ‘START’ and the
will now blink on the screen. Press +/- buttons to
select the correct hour. Press > to move to the next step.
The ‘START’ and minutes will now blink on the screen. Press +/- buttons to select the
correct minute. Press > to move to the next step.
The word ‘END’ and the
will now blink on the screen. Press +/- buttons to select
the correct hour. Press > to move to the next step.
The ‘END’ and minutes will now blink on the screen. Press +/- buttons to select the
correct minute. Press > to move to the next step.
USER INSTRUCTIONS - OPERATION
Содержание Inset Electric
Страница 1: ...F I R E Inset Electric T H E G A L L E R Y C O L L E C T I O N C O U K ...
Страница 4: ......
Страница 12: ...TECHNICAL INFORMATION 2 0 1 0 2 0 1 851 0 964 0 00029 9 ...