THE GALLERY COLLECTION Inset Electric, Инструкция по установке и эксплуатации

Страница: 11 / 13

No power to the appliance

Check that the appliance is connected to the mains supply and switched on

Check the remote control batteries

Check the consumer unit breaker has not tripped
 Check the fuse in the plug

Confirm the output from the socket by plugging in a different appliance
Flame effect working but no heat

Determine if Temperature Mode is activated and that the set temperature is higher than
the current room temperature

Check for blockages/obstructions around air intakes as the safety cut-out may have
activated. Clear any blockages/obstructions

Switch appliance off at the mains, wait for 1 minute then switch back on. These actions
should reset the safety feature
Noise during operation
 It is normal for some noise during operation due to moving mechanical components and
air movement
 Check for any foreign objects deposited through the air vents
Remote control not working
 Refer back to check that the appliance has power

Check the batteries in the handset are in working order and show no signs of corrosion
or damage
Burning smell coming from appliance
 Check for a build-up of dust or obstruction on the air vents and clear if
necessary

Check for any foreign objects or liquids deposited through the air vents

Do not operate the appliance if the smell persists.
TROUBLESHOOTING