Jetmaster 850 Bedrock Flueless Fire Outdoor (N.T.S.)
The installation of the 850 BROFF is designed to be fitted directly into a Hebel heat cell when into a timber frame out.
For a Masonry installation where no combustibles are present within 200mm of the firebox sides or back and 600mm
above the front or top of the firebox, the masonry enclosure opening may be set up dimensionally to take the firebox
as an insert.
5BKQFI>QB>KV@>SFQVQLM>KA?LQQLJTFQESBKQPPNJJB>@E5BKQLMBKFKDPQL?B?FOA>KA
SBOJFKMOLLCBA
Firebox - The Stainless Steel firebox is basically rectangular in shape with a sloping rear back plate to provide
reflective heat and to assist the migration of burner gases to the top of the firebox, exiting at the underside of the top
frame section. The firebox height is 670mm high x 950mm wide at the front frame. Depth from the front of the firebox
to the rear vertical back plate is 340mm. The vertical rear section is 300mm high from the base of the firebox. The
internal surfaces of the firebox have a burnished polished finish that presents a spectacular “hologram” effect when
the burner is in use.
the fascia frame on the sides and top are 50mm in width. The frame is constructed from heavy duty 5mm Stainless
Steel. The bottom frame is 20mm in width and is a strengthening stiffener as well as a finishing detail.
the burner is a standard Jetmaster 850 sFB constructed entirely of Stainless Steel including the burner frame, front
panel and cover plate (but excluding the valve and operating components of the burner). Operation of the burner is
manual ignition and flame control, with a standing pilot. Electronics are not offered on outdoor fires in the interests of
durability and simplicity.
BROFF2
Product Description
50
50
Firebox
60
0
20
FRONT ELEVATION
SIDE ELEVATION
PLAN
Firebox
950 (Outer frame)
50
Burner
Burner
340
30
0
34
0
Burner
50
15dia.Gas entry
15 dia.
Gas entry
15 dia. Gas entry positioned midpoint
Flue gas
Radiant
Heat
930 (Firebox outer)
Fig. 1
section a-a
JEjTMASTER
JETMASTER
A
A
FRONT ELEVATION
830
75
75
75
5MM SS COVER PLATE WITH SS HANGERS
WELDED TO BACK OF SS FRONT COVER PLATE
5
10
SS FRONT COVER PLATE
BURNER FRONT COVER
10
10
Jetmaster 850 Bedrock Outdoor Flueless Fire Front Cover Plate (N.T.S.)
Fig. 2
Rev02 Dec 2014
