The Fire Beam firebeam, Руководство пользователя

Страница: 4 / 16

installing and commissioning
screw in through holes
provided outside of the
rubber seal
then screw down
the head screws
with the 3mm allen
key provided
wire into system as required
See generic wiring diagram on
the following page. For other
configurations contact us or
view our website.
2 knock outs are provided
on both sides
wire to low level controller
using bottom colour coded
terminals
connect the head
to the base plate
by first plugging in
the connector
step one. mounting the head
screw the head backing plate to the wall - always try to use as
sturdy location as possible, such as brick or major structural
steels (avoid mounting to outer metal cladding etc)
step two. mounting the controller
Important
mount the controller at eye level and with easy access
screw in through holes
provided outside of the
rubber seal
wire to head using colour
coded terminals
Also available adapter plate
use this accessory for easy mounting to unistrut fabrication. Holes are pre drilled to the
correct pitch of the head and conveniently positioned for use with unistrut
4