THE BOLD LOOK OF KOHLER Hose, Инструкция к набору для обслуживания

Страница: 4 / 12

Install the New Hose
Attach the sprayhead to the new pullout hose.
Feed the new hose through the outlet end of the spout until the
sprayhead is seated onto the spout. You may need to twist the
hose to help feed it through the faucet body.
Assemble the weight and clip onto the new hose.
Make sure any wires are not twisted around the hose, then attach
the hose to the quick-connect on the solenoid.
Reinstall the cover.
Position the weight between 2
″
(51 mm) and 3
″
(76 mm) from the
cabinet floor.
Extend and retract the spray hose to check for smooth operation.
Adjust the weight and clip as needed.
Turn on the water supply.
Rotate the handle to the open position and check for leaks.
2" (51 mm)–
3" (76 mm)
Clip
Solenoid
Weight
Cover
Hose
Clip
1191849-9-A 4 Kohler Co.