7. Install the Handshower
Run cold and hot water through the shower outlet to flush out
dirt and debris.
Insert the screen washer into the outlet end of the elbow. Thread
the handshower onto the elbow. Adjust the position of the elbow
as needed so the installed handshower will lean over the bath
rim.
Fit a rubber gasket into the tapered end of the handshower hose.
Securely handtighten the handshower hose to the elbow from
underneath.
Securely handtighten the handshower hose to the high-pressure
hose.
Fit a rubber gasket into the end of the high-pressure hose.
Securely wrench-tighten the high-pressure hose to the spout
diverter.
Screen Washer
Nut
Inlet
To spout
diverter.
Elbow
High-Pressure
Hose
Handshower Hose
Rubber
Gasket
Rubber Gasket
1330094-2-B
10
Kohler Co.