FOR SAFE USE OF YOUR GRILL AND TO AVOID SERIOUS INJURY:
• Do not let children operate or play near grill.
• Keep appliance area clear and free from combustible materials, gasoline
and other flammable vapors and liquids.
• Do not block holes in bottom or back of grill.
• Check burner flames regularly.
• Use grill only in well-ventilated space. NEVER use in enclosed space such
as carport, garage, porch, covered patio, or under overhead unprotected
combustible construction.
• Do not use charcoal in a gas grill.
• Use grill at least 3 feet from any wall or railing, or other combustible
construction.
• Maintain 10 feet clearance to objects that can catch fire or sources of
ignition such as pilot lights on water heaters, live electrical appliances, etc.
• Do not obstruct the flow of combustion and ventilation air.
• Keep the ventilation opening(s) of the cylinder enclosure free and clear
from debris.
NOTE:
All servicing of the Thane Q
TM
barbeque grill must be performed by an authorized
service representative. To locate an authorized service representative call 1-866-689-2023.
THE THANE Q
TM
USES A 16. 4OZ./465 GRAMS (1.02 LBS.) CANISTER
OF PROPANE FUEL
1. Make sure all control knobs are in the OFF position.
2. Place the Thane Q
TM
on its side with the control knobs to your right
(Illust. 1).
3. Located on the left side of the bottom of the “Q” is a plate which is easily
removed by pushing the tab to the left and lifting out the plate.
4. Return the Thane Q
TM
to the upright position.
5. Place the “Q” on the edge of a table or tailgate with the bottom opening
over the table edge.
CANISTER MUST BE INSERTED IN AN UPRIGHT
POSITION.
6. Remove screw cap from canister.
7. Insert canister into bottom opening and screw firmly into place
(Illust. 2).
CANISTER MUST BE INSERTED IN AN UPRIGHT POSITION.
8. Replace bottom plate.
BOTTOM PLATE MUST BE REPLACED OR THANE Q
TM
WILL NOT
BE LEVEL.
Before using grill be sure both burner set-ups match this illustration. If they do
not match do not use grill. Verify the burner pipe is connected to the brass ori-
fice (see enlargement above) and all screws are present and tight. Call
Customer Service at
866-689-2023
for assistance - if needed.
INSTALLING THE CYLINDER
• Read labels on the LP Gas Supply Cylinder
• Cylinder must be installed and used in an upright position to avoid flare-ups.
• Keep the ventilation opening(s) of the cylinder enclosure free and clear
from debris.
TAB
1
2
Page 7
Page 6
