8. Operation method of the cell and considerations
a) Charging
Make sure to charge using the charger specifically equipped by our company. Irregular
or non-conforming chargers may reduce life the cell or invalid the cell!
The cell that has been fully discharged (the bicycle stop running) can be charged with
more than 95% of electricity within 5h, and can be fully charged within 8h.
During charging, neither the positive end nor the negative end is allowed to be
contacted with metal.
When leaving factory, the cell's electricity is about 80%. Prior to driving a new bicycle,
charge it for 3-10h.
If the bicycle is left for more than one month, call's electricity will reduce by about 5%.
It is recommended to charge it before use.
Please charge the cell timely to ensure driving mileage.
During charging, the charger may became hot. As long as the temperature does not
exceed 60 °C, it is normal.
When charging, please put the charger and the whole bicycle at a stable and dry place
which is free of flammable and explosive goods and is out of reach of children.
You should charge the cell within 24h after it is fully discharged, and charging time
should not be less than 3h.
Make sure that there is no short-circuit at the charging port.
b) Discharging
Do not use the cell for purposes other than the electrical bicycle of this
model, otherwise warranty will not be provided.
Once short-circuit occurs, the cell management system will provide
automatic protection, and the fuse piece connected in series with power
line will fuse, giving dual protection for you cell. At about 2min after the
short circuit is released and the fuse piece is replaced, the cell will work
normally.
Damage or unreasonably configuration of the controller, motor, horn,
lighting facility, etc. of electrical bicycle all will cause the cell to discharge at
high current. At this time, the cell will stop output for protection, but will
recover within 10s, which will not have any effect on your driving.
Working temperature range of the cell: -101:
—
55t. Like other cells, its
available energy will reduce with the rise of temperature, which is a normal
phenomenon.
Make short out the discharging port.
9. Storage
a) If long-time storage (more than one month) is needed, it is
recommended to charge the cell to 60%--80% of electricity. During
storage, it is needed to charge the cell every 3 months, and charging is
also needed before usage.
b) The cell should be stored at a cool and dry environment.
c) During storage, prevent conductive objects connecting the positive pole
with the negative one.
d) Do not use the cell near a fire source.
e) Do not disassemble the cell.
f)
Do not refit the cell.
Содержание EBIKE
Страница 1: ...THAMLEV EBIKE MANUAL...
