How to use the
vibration speaker
USING YOUR
GEEKER SPEAKER
PART
1
Here’s how:
1
Make sure you have installed the
two AAA batteries correctly, and
that the batteries are charged.
2
Your vibration speaker has a short
wire on the bottom with a 3.5-mm
phone jack. This plug will fit in
almost any common device that
plays music.
3
Once you have hooked up a
suitable device, turn on the
vibration speaker by sliding the
power switch. The illuminated
light next to the switch shows
you the device is turned on.
4
Take the vibrating pod out of the
device. That’s the round green
part mounted on the top of the
vibration speaker body. Pull it
out of the device and take a look
at its underside. You will find
an adhesive pad there. Pull the
film off of the adhesive pad, affix
the vibrating pod to the sound
booster box, and start the music.
You will need:
Vibration speaker;
an audio source
such as an MP3 player, a cell phone
with a headphone jack, or a sound
system; empty box (such as a cereal
box) to use as a sound booster box
5