Installing the
batteries
You will first have to install batteries
in the sound booster. It’s best to let
an adult help you. Open the battery
compartment by loosening the small
screw on the bottom of the device.
Insert two 1.5-volt batteries, type
AAA/LR03. The + and – symbols on
the batteries and in the compartment
show you the correct way to insert
them. Finally, put the lid back on the
battery compartment and screw it on
tight with the small screw.
Now you are ready to rock! Let’s get
your vibration speaker jammin’.
POWERING UP WITH
BATTERIES
GEEK
OUT!
You will need:
Vibration speaker,
two AAA batteries
(1.5-volt, type LR03), small Phillips
head (cross-head) screwdriver
Woo-hoo! G
et your
batteries r
eady.
Time to p
ump up th
e
volume!
4