Seite 5 / 8
4) Installing TTT-C
Tonearm
For assembling the tonearm, please follow the manual of the tonearm itself carefully. The
tonearm-base of the TTT-C is mounted with 8 screws (1). For soldering the internal wiring of
the tonearm, the outlet-terminal can be disassembled by losing the 4 screws (2).
Depending on the configuration of your turntable and tonearm, the electrical connection has
been made already.
Set the level
Place the unit on an even and horizontal base. The level of the TTT-C can be set by turning the
spikes in and out of the main chassis. Please use a level gauge to level the unit exactly hori-
zontal. Please make sure at least one of the spikes is tightened fully.
The spikes are guided not only by a fine pitch thread but by a cylindrical fitting as well.
Therefore, no locking of the spike is needed. The maximum range of adjustment is 6mm.
Interconnect
Connect the ground wire (deliverd with your TTT-C) with the jack of the terminal (4) and with
the fitting connection of your phono-stage.
Configure the external charger with the country-specific power-adapter and connect it with
the fitting jack (5) of the TTT-C. Plug the external charger into the electrical socket. The exter-
nal charger can handle all usual input voltage.
1
2.5mm
2
1.3mm
3
5
4
