Seite 5 / 8
4) Adjusting the azimuth
The azimuth (Horizontal Tracking Angle) can be adjusted with a setscrew. The azimuth has
been set carefully at our workshop. If the cartridge is manufactured correctly, there is no
adjustment needed. We do not recommend adjusting the azimuth, except if you do have a
problem in channel separation.
1)
Loose the two locking-screws with the screwdriver delivered with the tonearm.
Make sure not to take away the screws but just untighten them.
2)
Adjust the azimuth by turning the setscrew slowly.
3)
Tighten the two locking-screws again. Do not forget to do this, as it has an audible in-
fluence on the sound (dynamics).
Setscrew (Hex 1,5)
2x Locking-screw (2,0mm)
