Installation Maintenance Manual
FMHPA 82166
6-1
Jul 2008
©
THALES AVIONICS Ltd. This document and any
information included are the property of Thales Avionics.
They cannot be reproduced, disclosed or utilized without the
company’s prior written approval
SECTION 6
60000
MAINTENANCE PRACTICES
6.1. GENERAL
This section provides instructions for the removing, reinstalling and adjusting of the
FMHPA that has been previously installed by the aircraft manufacturer or completion
center.
CAUTION:
TO AVOID INJURY TO PERSONNEL OR DAMAGE TO
EQUIPMENT, ENSURE ADEQUATE PRECAUTIONS ARE
TAKEN WHILE PERFORMING ANY WORK IF THE ELECTRICAL
POWER IS APPLIED TO THE LRU.
CAUTION:
TO PREVENT DAMAGE TO EQUIPMENT, TURN AIRCRAFT
POWER OFF INCLUDING SDU BEFORE REMOVING OR
INSTALLING FMHPA.
Field lubrication or other maintenance procedures are not required. The design of the
FMHPA is such that they do not require field maintenance to maintain airworthiness. If
functional problems occur, the SDU Built-in Test Equipment (BITE) capability
identifies the faulty LRU. The FMHPA maintenance is limited to replacement on
verified failure.
6.2. EQUIPMENT AND MATERIALS
CAUTION:
BEFORE YOU USE A MATERIAL, REFER TO THE
MANUFACTURERS‚ MATERIAL SAFETY DATA SHEETS FOR
SAFETY INFORMATION. SOME MATERIALS CAN BE
DANGEROUS.
