Thaijetboard 2011 Jetkayak, Руководство пользователя, Страница: 11 / 32

10). Air Intake
Opening
Allows air into the bilge for ventilation purposes and engine supply.
The snorkel valve inside the intake opening will be closed when the craft submerges in water or the craft is capsized
11). Exhaust Flushing Connector
A convenient
connector is
Refer to POST-OPERATION CARE section for proper use.
Ensure to close the connector with the cap after flushing. Otherwise the cooling water from jet will flow out here,
and the exhaust system will not be cooled, which will damage the exhaust system.
12). Bilge Drain Plugs
13). Oil Drain Plug
Oil drain plug is located at the bottom of hull beneath engine.
14). Bilge Pump Water Outlet
The outlet exits the water in bilge by the electric bilge pump inside the engine compartment.
15). Bilge Pump Switch
16). Exhaust By-Pass
Small exit of engine exhaust for easier engine start and smooth idle speed.
17). Jet Pump Nozzle And Steering Nozzle
18). Jet Pump Water Intake And Intake Grate
19). Control Box
Control Box. It holds CDI and all other electronic components.
20). Battery
The battery is located in the engine compartment. Ensure to connect the battery with correct “+” and “-” terminals.
21). Engine Oil Filling Cap And Oil Dipstick
Located in engine compartment.
It allows adding oil in the engine when required. Dipstick indicates the engine oil level. Refer to LIQUIDS for more details.
22). Bilge Pump and Water Level Sensor
23). Coolant Fill/Pressure Cap
CAUTION:
Slowly add coolant until it is full. Adding coolant after the first time use.
24). Expansion Tank Cap
Located in engine compartment. Refer to LIQUIDS for more details.
11
However it is not water proof. If the air intake opening is kept under water, water may get inside the bilge
under certain circumstances.
Always take the watercraft out of the water prior to open drain plugs.
Make sure the drain plugs are properly secured prior to launching the watercraft in the water.
WARNING
Should water be found in the bilge, it can be easily drained by opening the drain plugs when engine is
off and watercraft is out of the water.
Make sure the drain plug is properly secured after oil change and the access window is properly sealed
with “O” ring and properly secured. No water leak!
It is a push button switch to turn on the electric bilge pump manually located inside engine
compartment, to evacuate water from the bilge.
Water exits from the jet pump nozzle. jetKayak models are equipped with a steering nozzle. Steering
nozzle turns left and right by operating steering handle.
The water is drawn in by the impeller through this opening. The water intake grate minimizes the entry of
foreign objects into the propulsion system.
Located in engine compartment. Bilge pump draws water out when water level sensor detects water or
when the bilge pump switch is pressed.
Located in engine compartment. It regulates engine coolant pressure and provides access to add
coolant. Refer to LIQUIDS for more details.
WARNING
!
!