PREPARATIONS
FOR
INSTALLATION
The installation of the unit has to be carried out by the professional
installation operator. Improper installation of the unit may cause water
leakage, an electric shock or fires .
4
.
1
.
1 Installation
sites
for
the outdoor unit
1)
Installed the unit at the places where not be exposed to rain or not direct
sunshine ,and the places with good ventilation.
2) Noises made by unit will not affect the neighboring places.
3) Easy to connect the units and the power.
4) Not install the unit on the non-special metal bracket;
5) Not to installed at the places where may leak inflammable gases;
6) In heating, pay attention to the drainage of the condensed water from the base
plate so that it does not affect the neighbor or passer-by;
7) Not locate the exhaust ports pointing the windward direction ;
8) Make sure that the children can not touch it ;
9) Leave enough space for installation or maintenance, refer to Fig 1;
10) The air conditioner is not applicable for the following fields:
a. On the vehicle or ship;
b. The place with heavy oil or strong wind;
c. The moist place, such as bathroom, cellar and so on;
d. The place with high-frequency equipment, such as wire-less equipment,
electric welder, medical instrument and so on;
e. Other special fields.
CAUTION
4
.
1
Selection of the installation site
Fig 1
＞300mm
＞
2000mm
＞600mm
＞
300mm
Air inlet
Air outlet
wall or obstacles
A
ir i
n
le
t
Connecting
wire and tube
Air inlet
>
3
0
0
m
m
Air inlet
>300mm
Air inlet
Connecting
wire and tube
Air inlet
>
3
0
0
m
m
>
60
0m
m
>230mm
4
.
1
.
2 Installation
sites
for
the indoor unit
1) Keep the unit level and without any vibration and keep supply air to all places in
room quickly;
2) The air inlet or outlet of the indoor unit can not be blocked so that the supple air
or return air is free and not affected by heat or moisture nearby;
3) Not install it in the place with too much oil smoke or steam.
9
!
