22
17. Gear oil
Gear Oil Change
Remove oil filler bolt.
Remove drain plug and drain gear oil out.
Install the drain plug to a satisfactory torque.
Make sure that the drain bolt washer can be re-used or re-place.
Add oil to specified quantity.
Gear Oil Quantity: 300~350 ml. when replacing
Make sure that the filler bolt washer can be re-used or re-place and install the bolt
to a satisfactory torque.
(oil viscosity SAE 90#)
Start engine and run engine for 2-3 minutes.
Turn off engine and make sure that oil level is correct.
Check for any leaks.
18. Seat-Lock
Removal of seat: After opening the lock by
turning the key the seat can be removed by
pressing the seat-lock and lifting the seat at the
rear.
Assembly of seat: Put the seat into the front guide
and press the rear down until it latches.
Take care with assembly of the seat that you don't
squash or damage the electric cables.
FINAL DIFFERENTIAL
FIRST DIFFERENTIAL
Содержание Outback 425
Страница 5: ...5 ...
Страница 25: ...25 High speed turning Riding up and down the hill Rough road surface ...
Страница 27: ...27 ...