Tgard 7900S Series Скачать руководство пользователя страница 11

Страница: 11 / 52

PS-7900 Series User Manual

C H A P T E R 2

Live Feed

2.1 Watching a Live Feed

The Live Feed mode is automatically started after the DVR boots up. It is also at the very top of the menu hierarchy, thus

hitting the ESC button multiple times (depending on which menu you’re on) will bring you to the Live Feed mode.

2.1.1 Understanding Live Feed Icons

There are multiple icons on each display in Live Feed mode to indicate different camera status and settings. These icons

include:

Event Icon:

Indicates video loss or tampering, motion detection and/or sensor alarm.

Record Icon

: Indicates the current channel is recording. The recording may have been started manually, from a

schedule, and/or triggered from motion or alarm.

Picture Settings Icon

: Adjust picture settings for selected display.

PTZ Control Icon:

Enter PTZ control mode for the selected display.

Preset Icon:

Recall PTZ preset.

Patrol Icon:

Recall PTZ patrol.

Tour Icon:

Recall PTZ tour.

Zoom In/Zoom Out:

Zoom in/out with PTZ.

Full Screen/Exit Full Screen Icon:

Enter into/exit out of full screen mode for selected display.

Audio On/Audio Off Icon:

Enable/disable audio for selected display.

Close Icon:

Exit out of current setting and return to previous mode.

Figure 15. Live Feed Icons

Содержание 7900S Series





















































Результаты поиска

Содержание 7900S Series

Отзывы:

Tgard 7900S Series, Руководство пользователя, Страница: 11 / 52

Результаты поиска

Содержание 7900S Series

Отзывы: