©Copyright Task Force Tips LLC 2012-2019
LIB-065 August 30, 2019 Rev 01
4
2.1 MODELS AND TERMS
Tip Only: A nozzle without an integral ball shutoff valve.
Ultimatic® ER Series: Fog and straight stream monitor nozzles with constant pressure/variable fl ow control. There are four
diff erent pressure ranges. Electrically operated pattern control (with manual over-ride) adjusts from straight stream to 120° wide
fog. The nozzle can fl ush large debris without shutting down.
B-TO-ERP WITH 6-PIN PLUG FOR TFT MONITORS
COUPLING
SERIAL NUMBER
STREAM
SHAPER
MANUAL
OVERRIDE KNOB
B745
10-125 GPM @ 100 PSI
40-500 LPM @ 6.8 BAR
VALPARAISO, IN 46383-9327 • +1 219 462-6161 • 800 348-2686
TASK FORCE TIPS ®
MADE IN U.S.A.
www.tft.com
MADE IN U.S.A.
www.tft.com
Understand manual before use. Obtain safety
information at www.tft.com/serial-number
WARNING
PRODUCT LABEL
Figure 2.1
Models and Terms
2.2 MECHANICAL SPECIFICATIONS
Weight
6.4 lbs
2.9 kg
Hydrostatic burst pressure minimum
1200 psi
83 bar
Operating temperature range of fl uid
33 to 120º F
1 to 50º C
Storage temperature range
-40 to 150º F
-40 to 65º C
Actuation Force
173 lbs
78.5 kg
Speed Stream-Fog
3.4 sec.
3.4 sec.
Materials used
Aluminum 6000 series hard anodized MIL8625 class 3 type 2,
stainless steel 300 series, nylon 6-6, nitrile rubber
2.3 ELECTRICAL SPECIFICATIONS
Nominal operating voltage:
12 or 24 VDC (auto sense)
Motor current:
Nominal*
Limit
@ 12 VDC
@24 VDC
@ 12 VDC
@24 VDC
Nozzle motor:
1 amp
0.5 amps
5 amps
2.5 amps
*with rated water pressure applied
Recommended fuse or circuit breaker size:
Refer to TFT Literature LIM-040
Operating temperature range:
-30F to +120F (-34C to +49C)
Environmental Rating:
All components designed to meet minimum rating of NEMA 4 (IP65).
