©Copyright Task Force Tips LLC 2020
LIM-032 February 18, 2020 Rev00
TASK FORCE TIPS LLC
MADE IN USA • TFT.com
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
11.0 OPERATION AND INSPECTION CHECKLIST
BEFORE EACH USE,
the nozzle must be inspected to this checklist:
1. There is no obvious damage such as missing, broken or loose parts, damaged labels etc.
2. Debris screen is free of debris
3. Coupling is tight and leak free
4. Nozzle operates freely through full range and regulates
fl
ow
5. Nozzle
fl
ow is adequate as indicated by pump pressure and nozzle reaction
6. Shaper turns freely and adjusts pattern through full range
7. Shaper detent (if so equipped) operates smoothly and positively.
BEFORE BEING PLACED BACK IN SERVICE,
nozzles must be inspected to this checklist:
1. All controls and adjustments are operational
2. Shut o
ff
valve (if so equipped) closes o
ff
the
fl
ow completely
3. There are no broken or missing parts
4. There is no damage to the nozzle that could impair safe operation (e.g. dents, cracks, corrosion or other defects)
5. The thread gasket is in good condition
6. The waterway is clear of obstructions
7. Nozzle is clean and markings are legible
8. Coupling is retightened properly
9. Shaper is set to desired pattern
NFPA 1962: Standard for the care, use, inspection, service testing, and replacement of
fi
re hose, couplings, nozzles and
fi
re hose appliances. Quincy,
MA: National Fire Protection Agency
WARNING
Equipment failing any part of the checklist is unsafe for use and must have the problem corrected
before use or being placed back into service. Operating equipment that has failed the checklist is
a misuse of this equipment.
