Teleport Integration Unit. Configuration Manual
70
Example:
config inputs 1 description some_name
3.
Specifying a remote device for the input
config inputs <INPUT> remdev <IP>
where
<INPUT>
is the input number,
<IP Address>
– IP address of the remote device
Note:
First add the remote device to the list (
config teleport add ..
). If you
add a device with an unknown IP address, an error will occur.
Example:
config inputs 1 remdev 192.168.0.2
4.
Specifying the output port of the remote device
config inputs <INPUT> remport <NUM>
where
<INPUT>
is the input number,
<NUM>
– the number of the remote device output to which the input state will be
broadcast
Example:
config inputs 1 remport 5
5.
Inversion of the input state
config inputs <INPUT> inverse <STATE>
where
<INPUT>
is the input number,
<STATE>
– the state of the input inversion
enable – input inverted
disable
– input is not inverted, normal mode
Example:
config inputs 1 inverse enable
5.4.3.10
Configuring outputs
1.
Setting the initial state of the output in the manual mode
config outputs <OUTPUT> state <STATE>
where
<OUTPUT>
is the output number,
<STATE>
is the output state:
short — closed
open – open
Example:
config outputs 1 state short
2.
Configuring the output management mode
config outputs <OUTPUT> mode <STATE>
where
<OUTPUT>
is the output number,
<STATE>
– operating mode:
pair – Pair Connection mode
/
"Pair connection", the input state from
the remote Teleport can be broadcast to the ouput
