22
Figure 6.3 - Entering user name and password.
IMPORTANT!
Note that the user name and password are case sensitive.
6.4 Setting PoE on ports
Power supply via PoE is configured with the use of jumpers (see Section 3.4.2).
All connections shall be performed with 230VAC power off.
IMPORTANT!
When using TFortis TH camera housings put RES_PWR jumper into the NO
position.
IMPORTANT!
If RES_PWR is put into the NO position, make sure that when you connect
devices that do not support PoE (for example, a PC), PoE jumpers for the
corresponding port are removed.
6.5 Switching on camera housing preheating
When the camera is started in freezing weather, it can fail to start or, what is
worse, break down. To solve this problem, use the Comfort Start function. To do
this, go to the Comfort Start section on the Special Function tab and enable the
option. By default, it is OFF. The function is available only with TFortis TH
camera housings.
IMPORTANT!
