28
TIME ZONE SETTING:
The time zone default of the weather station is “0”. To set
a different time zone:
1.
The current time zone value starts flashing.
2.
Use the
+
key to set the time zone. The range runs
from 0 to -12 and then runs from +12 back to 0 in
consecutive 1-hour intervals.
3.
Confirm with the
SET
key and enter the
Manual
Time Setting
.
MANUAL TIME SETTING:
In case the weather station cannot detect the DCF-signal
(for example due to disturbances, transmitting distance,
etc.), the time can be manually set. The clock will then
work as a normal quartz clock.
1.
The hour digit will start flashing.
2.
Use the
+
key to set the hour.
3.
Press again the
SET
key to set the minutes. The
minute digits start flashing.
4.
Use the
+
key to set the minutes.
5.
Confirm with the
SET
key and enter the
Calendar
setting
.
Note:
The unit will still try and receive the signal despite it being
manually set. When it does receive the signal, it will
change the manually set time into the received time.
During reception attempts the DCF tower icon will flash. If
reception has been unsuccessful, then the DCF tower icon
will not appear but reception will still be attempted the
following day.
Flashing
Hour flashing
Minutes flashing
