WeatherHub Sensor
This sensor is a component of the „WeatherHub“ system for measuring temperature (indoor or outdoor) with a waterproof cable sensor, it
can be used with this system only. To use the sensor you need an installed WeatherHub gateway.
Delivery contents
Temperature sensor (30.3301.02) with a waterproof cable sensor, manual
Before you use it:
Please be sure to read this short-instruction manual carefully.
Following the instruction manual for use will prevent damage to the device and loss of your statutory rights arising from defects due to
incorrect use.
We shall not be liable for any damage occurring as a result of not following these instructions. Likewise, we take no responsibility for any
incorrect readings and for any consequences which may result from them.
Please take particular note of the safety advice!
Please look after this manual for future reference.
For your safety:
•
The product is exclusively intended for the field of application described above. The product should only be used as described
within these instructions.
•
Unauthorised repairs, modifications or changes to the product are prohibited.
Caution!
Risk of injury:
•
Keep this instrument and the batteries out of reach of children.
•
Batteries must not be thrown into the fire, short-circuited, taken apart or recharged. Risk of explosion!
•
Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent damage caused by a leaking
battery. Never use a combination of old and new batteries together or batteries of different types.
•
Remove the batteries if you do not use the product for a lengthy period.
•
Wear chemical-resistant protective gloves and glasses when handling leaked batteries.
Important information on product safety!
•
Do not place your device near extreme temperatures, vibrations or shocks.
•
Clean the instrument with a soft damp cloth. Do not use solvents or scouring agents.
Sensor set up
Open the battery compartment of the temperature sensor and put in 2x AAA batteries with the correct polarity.
Add sensor
Open the app, the dashboard is displayed. The sample sensors are for testing purposes only and may be deleted later on. Tap „Add“ new
sensor and scan the sensor‘s QR code. Then set a name for the sensor. To set a name, select the transmitter and then tap the area left of
the pencil icon on the top right corner of the screen.
Read measurements
Now you can read the measured values on your mobile phone.
Battery replacement
When you receive the notification for changing the batteries in the app, open the battery compartment of the sensor and change the
batteries.
Application
Used outside, choose a shady and dry position for the transmitter. Direct sunshine falsifies the measurement and continuous humidity
strains the electronic components needlessly. The cable sensor is waterproof, ideal to monitor freezers, aquariums, ponds and pools.
Specifications
Batteries:
2 x 1,5V AAA
Battery lifetime:
approx. 2 years (Alkaline)
Measuring range calbe sensor:
– 30°C … +60°C (-22°F … 140°F)
Accuracy:
±
1°C
Measuring interval:
7 minutes
Transmission frequency:
868 MHz
Maximum radio-frequency power:
< 25mW
Transmitting range:
100m (free field)
Length of cable sensor:
approx. 1m
Never throw flat batteries and rechargeable batteries in household waste.
As a consumer, you are legally required to take them to your retail store or to appropriate
collection sites according to national or local regulations in order to protect the environment.
The symbols for the heavy metals contained are: Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this product with other household waste. The user is obligated to take end-of-life devices to
a designated collection point for the disposal of
electrical and electronic equipment, in order to ensure environmentally-compatible disposal.
More information and detailed instructions can be found in the app at “Info” or on
www.tfa-dostmann.de/weatherhub.
02/2017
Quick reference
30.3301.02 Temperature transmitter
with waterproof cable sensor
Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
EU Declaration of conformity
Hereby, TFA Dostmann declares that the radio equipment type 30.3301.02 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet address:
www.tfa-dostmann.de, E-Mail: [email protected]
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim, Germany
No part of this manual may be reproduced without written consent of TFA Dostmann.
The technical data are correct at the time of going to print and may change without prior notice.
The latest technical data and information about your product can be found by entering
your product number on our homepage.
