– 28 –
– 29 –
Digital alarm clock with LED digits
• If the alarm is not stopped manually, the ascending alarm tone automatically turns off after one minute and will
be reactivated at the same set time in the following day.
• The alarm symbol remains on the display.
• When the alarm rings, press the
SNZ/LIGHT
button and the snooze function is activated.
• Once the snooze function is activated, AL will be flashing on the display.
• The alarm will be interrupted for the set time.
8. Display mode
• Each press on the
MODE
button in normal mode will change the display between: Time, indoor temperature and
automatic dimming function OFF/ON.
8.1 Indoor temperature mode
• Select the temperature display by the
MODE
button.
• Press the
DOWN
button, to change between °C (default) or °F as temperature unit.
Digital alarm clock with LED digits
• Press and hold the
MODE
button, until the device alerts you with a beep, time and date appear in sequence (tem-
perature 5 s -> time 10 s).
• Press and hold the
MODE
button, until the device alerts you with a beep, to return to the time display.
8.2 Automatic dimming mode
• Select the automatic dimming function OFF/ON by pressing the
MODE
button.
• By default, the automatic dimming function is disabled (OFF).
• To activate (ON) or deactivate (OFF) the function press the
UP
or
DOWN
button.
• If the automatically backlight is activated (ON), the weak backlight turns on automatically at 6 pm and switches
off again at 6 am.
8.2.1 Time interval setting
• Press and hold the
MODE
button (display ON) to enter the setting mode for the automatic timer.
TFA_No. 60.2025_Anleitung 04.03.2019 8:25 Uhr Seite 15
